USETEXTLINKS = 1
foldersTree = gFld("<b>LIMING REDUCERS</b>", "index.htm")
	aux1 = insFld(foldersTree, gFld("Company Profile", "com_factory/factory-e.htm"))
	   insDoc(aux1, gLnk(0, "Facilities", "com_profile/facilities-e.htm"))
	   insDoc(aux1, gLnk(0, "News", "com_profile/news.htm"))
           insDoc(aux1, gLnk(0, "Prize", "com_prize/prize.htm"))
           insDoc(aux1, gLnk(0, "History", "com_profile/history-e.htm"))
        aux1 = insFld(foldersTree, gFld("Products", "liming-e.htm"))
                aux2 = insFld(aux1, gFld("<p><font color=#0000ff>High Precision Planetary Reducer</font></p>", "servobox.htm"))
	        aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Gear Reducers</font></p>", "images_lm/gear-e1.htm"))
		   insDoc(aux2, gLnk(0, "Gear Reducers", "images_lm/gear-e2.htm"))
		   insDoc(aux2, gLnk(0, "Multi-Stage", "images_lm/eg-multistage.htm"))
 		   insDoc(aux2, gLnk(0, "New type", "images_lm/eg-newtype.htm"))
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lm/eg-tech.htm"))
		    	    insDoc(aux3, gLnk(0, "Seletion of Motor", "images_lm/eg-motor.htm"))
                            insDoc(aux3, gLnk(0, "System Drawing", "images_lm/eg-system.htm"))
                            insDoc(aux3, gLnk(0, "Example of Selection", "images_lm/eg-example.htm"))
			    insDoc(aux3, gLnk(0, "Usage & Install", "images_lm/eg-usage.htm"))
			    insDoc(aux3, gLnk(0, "Usage Direction", "images_lm/eg-direction.htm"))
			    insDoc(aux3, gLnk(0, "Lubricant", "images_lm/eg-lubricant.htm"))
			    insDoc(aux3, gLnk(0, "Oil Capaities", "images_lm/eg-oil.htm"))
                            insDoc(aux3, gLnk(0, "Trouble Resolvent", "images_lm/eg-trouble.htm"))
  			   
		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Worm Reducer</font></p>", "images_lk/worm-e.htm"))
		   insDoc(aux2, gLnk(0, "Single Reduction", "images_lk/srwg-e.htm"))		
		   insDoc(aux2, gLnk(0, "Double Reduction(Worm-Worm)", "images_lk/drwg-e1.htm"))
 		   insDoc(aux2, gLnk(0, "Double Reduction(Gear-Worm)", "images_lk/drwg-e2.htm"))
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lk/tech-ew.htm"))
                            insDoc(aux3, gLnk(0, "System Drawing", "images_lk/ew-system.htm"))
                            insDoc(aux3, gLnk(0, "Rotation Directions", "images_lk/ew-direction.htm"))
			    insDoc(aux3, gLnk(0, "Oil Capaities", "images_lk/ew-oil.htm"))
		    	    insDoc(aux3, gLnk(0, "Example of Selection", "images_lk/ew-example.htm"))
                            insDoc(aux3, gLnk(0, "Usage & install", "images_lk/ew-usage.htm"))
			    insDoc(aux3, gLnk(0, "Lubricant", "images_lk/ew-lubricant.htm"))
                            insDoc(aux3, gLnk(0, "Trouble Resolvent", "images_lk/ew-trouble.htm"))
                            insDoc(aux3, gLnk(0, "Comparison table of parts for worm reducer", "images_lk/ew-comparison.htm"))
  			       	
                aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Small Reducers", "images_lc/asgear-e.htm"))
		  insDoc(aux2, gLnk(0, "Small Reducers", "images_lc/sgear-e.htm")) 
                  insDoc(aux2, gLnk(0, "Special Reducers", "images_lc/sgearsp.htm")) 
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lc/tech-es.htm"))
		    	    insDoc(aux3, gLnk(0, "System Drawing", "images_lc/es-system.htm"))
                            insDoc(aux3, gLnk(0, "DC Brake System Drawing", "images_lc/es-structure1.htm"))   	
                            insDoc(aux3, gLnk(0, "Electromagnetic clutch brake", "images_lc/es-structure2.htm"))
                            insDoc(aux3, gLnk(0, "Usage & Install", "images_lc/es-usage.htm"))
			    insDoc(aux3, gLnk(0, "Trouble Resolvent", "images_lc/es-trouble.htm"))
				
              aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Aluminum Worm Reducer", "images_lk_ne/alumi-e1.htm"))
		  insDoc(aux2, gLnk(0, "Introduce", "images_lk_ne/alumi-e2.htm")) 
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lk_ne/ea-tech.htm"))
                            insDoc(aux3, gLnk(0, "Reducers Parameter", "images_lk_ne/ca-parameter.htm"))
		    	    insDoc(aux3, gLnk(0, "Motor Flange Spec.", "images_lk_ne/ca-motor.htm"))
                            insDoc(aux3, gLnk(0, "System Drawing", "images_lk_ne/ea-system.htm"))
                            insDoc(aux3, gLnk(0, "Shaft Direction", "images_lk_ne/ea-shaft.htm"))
		    	    insDoc(aux3, gLnk(0, "Option Parts", "images_lk_ne/ca-parts.htm"))
		    	    insDoc(aux3, gLnk(0, "Lubricant", "images_lk_ne/ea-oil.htm"))
		    	    insDoc(aux3, gLnk(0, "Comparison Table of Parts", "images_lk_ne/ca-parts2.htm"))

                aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Compact AC GearMotor Series", "images_lm_c/compact-e1.htm"))
		  insDoc(aux2, gLnk(0, "Introduce", "images_lm_c/compact-e2.htm")) 
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lm_c/ec-tech.htm"))
                            insDoc(aux3, gLnk(0, "Example of Selection", "images_lm_c/ec-example.htm"))
		    	    insDoc(aux3, gLnk(0, "Motor Terminology", "images_lm_c/ec-motor-ter.htm"))
		    	    insDoc(aux3, gLnk(0, "50Hz Max Allowable Torque", "images_lm_c/cc-torqure50.htm"))
		    	    insDoc(aux3, gLnk(0, "60Hz Max Allowable Torque", "images_lm_c/cc-torqure60.htm"))
		    	    insDoc(aux3, gLnk(0, "Motor Specification", "images_lm_c/cc-motor.htm"))
		    	    insDoc(aux3, gLnk(0, "Option Parts", "images_lm_c/ec-parts.htm"))
                            insDoc(aux3, gLnk(0, "System Drawing", "images_lm_c/ec-system.htm"))
                            insDoc(aux3, gLnk(0, "The Selection of Screw", "images_lm_c/ec-screw.htm"))

                aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Screw Jack Reducers", "images_lk_vj/vj-e1.htm"))
		  insDoc(aux2, gLnk(0, "Screw Jack Reducers", "images_lk_vj/vj-e2.htm")) 
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lk_vj/evj-tech.htm"))
			    insDoc(aux3, gLnk(0, "Permissible bending load", "images_lk_vj/cvj-curve.htm"))
			    insDoc(aux3, gLnk(0, "System Drawing", "images_lk_vj/evj-system.htm"))
			    insDoc(aux3, gLnk(0, "Parameter", "images_lk_vj/evj-parameter.htm"))
			    insDoc(aux3, gLnk(0, "Input Transmission", "images_lk_vj/evj-inputtype.htm"))
		    	    insDoc(aux3, gLnk(0, "Screw", "images_lk_vj/evj-screw.htm"))
			    insDoc(aux3, gLnk(0, "ScrewEnd", "images_lk_vj/evj-screwend.htm"))

                aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Bevel Gear Reducers", "images_lm_th/bevel-c1.htm"))
		  insDoc(aux2, gLnk(0, "Bevel Gear Reducers", "images_lm_th/bevel-c2.htm")) 
			 aux3 = insFld(aux2, gFld("Technical Information", "images_lm_th/eth-tech.htm"))
			    insDoc(aux3, gLnk(0, "System Drawing", "images_lm_th/eth-system.htm"))
			    insDoc(aux3, gLnk(0, "Application", "images_lm_th/eth-application.htm"))
			    insDoc(aux3, gLnk(0, "Shaft & Rotation Direction", "images_lm_th/eth-shaft.htm"))
			    insDoc(aux3, gLnk(0, "Examples", "images_lm_th/cth-examples.htm"))


		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Variable</font></p>", "images_lm_variable/disco-e.htm"))
		   insDoc(aux2, gLnk(0, "Reducer with Variable", "images_lm_variable/disco-e.htm"))		
		   insDoc(aux2, gLnk(0, "Reducer with Belt-Variable", "images_lm_variable/belt-e.htm"))
		   insDoc(aux2, gLnk(0, "RCV type", "images_lm_variable/rcv-e.htm"))

		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Flange Worm Reducer</font></p>", "images_lm_flange/flange-e.htm"))
		   insDoc(aux2, gLnk(0, "System Drawing", "images_lm_flange/ef-system.htm"))		
		   insDoc(aux2, gLnk(0, "Usages Direction", "images_lm_flange/ef-direction.htm"))

		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Shaft Mounted Reducers</font></p>", "images_lm_shaft/shmd-e.htm"))
		   insDoc(aux2, gLnk(0, "COH Series","images_lm_shaft/coh-e.htm"))
		   insDoc(aux2, gLnk(0, "HE Series","images_lm_shaft/dm-he.htm"))
                   insDoc(aux2, gLnk(0, "SOG Series", "images_lm_shaft/sog-e.htm"))
                   insDoc(aux2, gLnk(0, "SOB Series", "images_lm_shaft/dm-sob.htm"))

		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Other type</font></p>", "worm-c.htm"))
		   insDoc(aux2, gLnk(0, "Special worm Reducers", "images_othertype/ostype.htm"))		
		   insDoc(aux2, gLnk(0, "Special reducers", "images_othertype/oatype.htm"))
		   
		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Gear boxes</font></p>", "images_gearbox/gearbox-e.htm"))
		 aux2 = insFld(aux1, gFld("<p><font color=#0000ff>Gear Parts</font></p>", "images_parts/parts-c.htm"))
		 

	aux1 = insFld(foldersTree, gFld("CAD Drawing", "down_cad/cad.HTM"))
		   insDoc(aux1, gLnk(0, "DWG Files", "down_cad/cadc-dwg.htm"))
		   insDoc(aux1, gLnk(0, "PDF Files", "down_cad/cadc-pdf.htm"))
                   insDoc(aux1, gLnk(0, "Catalog", "down_catalog/catalog.htm"))		   
                   insDoc(aux1, gLnk(0, "Early Periods Catolog", "down_catalogold/catalogold.htm"))	

	aux1 = insFld(foldersTree, gFld("About Reducer", "tech_abreducer/abreducer.htm"))
		   insDoc(aux1, gLnk(0, "Basic of Reducer", "tech_abreducer/abreducer.htm"))
		   insDoc(aux1, gLnk(0, "FAQ", "tech_abreducer/faq.htm"))
		   insDoc(aux1, gLnk(0, "Application of Reducer", "tech_abreducer/applic-e.htm"))
		   
	aux1 = insFld(foldersTree, gFld("Machinery technology", "tech_machtech/machtech.htm"))
	 	aux2 = insFld(aux1, gFld("Gear Technology", "tech_machtech/geartech.htm"))
		   insDoc(aux2, gLnk(0, "Basic of Gear", "tech_machtech/gearbasic.htm"))
		   insDoc(aux2, gLnk(0, "Gear measurement", "tech_machtech/gearcheck.htm"))
		   insDoc(aux2, gLnk(0, "Gear noise", "tech_machtech/gearnoise.htm"))
		   insDoc(aux2, gLnk(0, "Gear gap", "tech_machtech/gearf.htm"))
		   insDoc(aux2, gLnk(0, "Gear manufacture", "tech_machtech/gearmake.htm"))	
		   insDoc(aux2, gLnk(0, "Gear Lubricant", "tech_machtech/gearoil.htm"))
		aux2 = insFld(aux1, gFld("Worm Technology", "tech_machtech/wormtech.htm")) 
		   insDoc(aux2, gLnk(0, "Basic of worm Gear", "tech_machtech/wormtech.htm"))
		   insDoc(aux2, gLnk(0, "Worm gear manufacture", "tech_machtech/wormmake.htm"))	 
		   insDoc(aux2, gLnk(0, "Worm Measurement", "tech_machtech/wormcheck.htm"))	 
	    	aux2 = insFld(aux1, gFld("Machine Design", "tech_machtech/machbasic.htm"))
	    	    insDoc(aux2, gLnk(0, "Useful Formula", "tech_machtech/machfoum.htm"))	
                    insDoc(aux2, gLnk(0, "Worldwide Volt", "tech_machtech/volt.htm"))
                    insDoc(aux2, gLnk(0, "Weight of Motor", "tech_machtech/motorweight-e.htm"))
		aux2 = insFld(aux1, gFld("Online Calculation", "tech_machtech/cpu.htm"))
		   insDoc(aux2, gLnk(0, "Helix Gear", "tech_machtech/cpu-gear.htm"))
		   insDoc(aux2, gLnk(0, "Worm gear", "tech_machtech/cpu-worm.htm"))
		   insDoc(aux2, gLnk(0, "Bevel Gear", "tech_machtech/cpu-spiral.htm"))
 		   insDoc(aux2, gLnk(0, "Application", "tech_machtech/cpu-app.htm"))

	aux1 = insFld(foldersTree, gFld("E-commerce", "land.htm"))
		   insDoc(aux1, gLnk(0, "Technical Exchange", "bbs.htm"))
		   insDoc(aux1, gLnk(0, "Agent", "agent.htm"))
		   insDoc(aux1, gLnk(0, "Supplier", "/asp/lmpc1.asp"))
		   insDoc(aux1, gLnk(0, "Employee", "emp.htm"))

	aux1 = insFld(foldersTree, gFld("Other Information", "oth_oinfo/oinfo.htm"))
		   insDoc(aux1, gLnk(0, "Activities", "oth_oinfo/party.htm"))
		   insDoc(aux1, gLnk(0, "Recommend Site", "oth_oinfo/suggest.htm"))
		   insDoc(aux1, gLnk(0, "Search engine", "oth_oinfo/search1.htm"))